Fracture Toughness of Steels. (IV). Assessment of Defects and Requirement of Toughness to Steels by Means of Fracture Mechanics.
نویسندگان
چکیده
منابع مشابه
Carbide Structure and Fracture Toughness of High Speed Tool Steels
In the present study, M2 high speed steels were fabricated by using electro-slag rapid remelting process. Carbide structure was analysed and the fracture toughness and hardness were also measured after austenitization treatment at 1190 and 1210C followed by tempering treatment at 535C for billets with various diameters from 16 to 60 mm. Electro-slag rapid remelting (ESRR) process is an advanced...
متن کاملMezzo-scopic Analysis of Fracture Toughness in Steels
The cleavage fracture toughness of steels was mezzo-scopically analyzed on the basis of the statistical local fracture criterion approach. The statistical stress criterion at the crack tip region suggests that the cleavage fracture toughness in steels can be described as a function of the yield stress, the cleavage fracture stress, and other mechanical properties of the materials. Formulation o...
متن کاملEvaluation of Fracture Toughness by Stretched Zone Method in Machine Structural Steels by
The elastic-plastic fracture toughness JIc tests by the stretched zone method were performed to obtain JIc values for machine structural steels. The validity of the JIc values obtained was evaluated, and the effects of the heat treatment conditions and microstructure of steels on the JIc values were investigated by use of streched zone width, SZW. The results obtained are summarized as follows....
متن کاملEffect of Layers Position on Fracture Toughness of Functionally Graded Steels in Crack Divider Configuration
In the present study, fracture toughness of functionally graded steels in crack divider configuration has been modeled. By utilizing plain carbon and austenitic stainless steels slices with various thicknesses and arrangements as electroslag remelting electrodes, functionally graded steels were produced. The fracture toughness of the functionally graded steels in crack divider configuration has...
متن کاملFracture toughness of graphene.
Perfect graphene is believed to be the strongest material. However, the useful strength of large-area graphene with engineering relevance is usually determined by its fracture toughness, rather than the intrinsic strength that governs a uniform breaking of atomic bonds in perfect graphene. To date, the fracture toughness of graphene has not been measured. Here we report an in situ tensile testi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1993
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.62.62