Fracture Toughness of High Strength Ceramics by Notched Beam Test
نویسندگان
چکیده
منابع مشابه
Behavior of Concrete round Double Beam Fracture Toughness Test Specimens
Laboratory fracture toughness tests of concrete using wedge-loaded round double beam specimens with a length to diameter ratio of 2:1 show two distinctly different specimen behaviors. Either the crack remains in the plane of the notch, and a valid test result can be obtained, or there is lateral cracking around mid-length which invalidates the results. Results of a controlled study show that th...
متن کاملEvaluation of Fracture Strength of Ceramics Containing Small Surface Defects Introduced by Focused Ion Beam
The aim of this study was to clarify the effects of micro surface defects introduced by the focused ion beam (FIB) technique on the fracture strength of ceramics. Three-point bending tests on alumina-silicon carbide (Al₂O₃/SiC) ceramic composites containing crack-like surface defects introduced by FIB were carried out. A surface defect with area in the range 19 to 35 µm was introduced at the ce...
متن کاملThe Utility of R-Curves for Understanding Fracture Toughness-Strength Relations in Bridging Ceramics
The mechanical behavior of four rare earth (RE)-Mg-doped Si3N4 ceramics (RE5La, Lu, Y, Yb) with varying grainboundary adhesion has been examined with emphasis on materials containing La and Lu (which represent the extremes of RE ionic radius). Fracture-resistance curves (R-curves) for all ceramics rose very steeply initially, giving them exceptional strength and relative insensitivity to flaw s...
متن کاملOn the fracture toughness anisotropy of mechanically poled ferroelectric ceramics
In this paper an incremental constitutive theory for the deformation due to switching in ferroelectrics is applied to predict the fracture toughness anisotropy in these materials after mechanical poling. Mechanical poling of an initially unpoled specimen differs from electrical poling in that only mechanical stresses are applied to the material. Therefore, no electrical polarization can develop...
متن کاملThermal-stress resistance and fracture toughness of two tool ceramics
The thermal-stress resistance and fracture strength behaviour of two oxide ceramics (a hot-pressed pure AI203 and a composite ceramic NTK-HC2) subjected to severe thermal shocks have been investigated. The damage resistance parameter (Kic/of)2 for both ceramics is also determined for a wide range of temperatures (25 ~ to 800 ~ C) and cross-head rates (10 -2 cm min -1 ~ 2.5 m sec -1 ). Fracture ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1982
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.90.1041_227