Fracture Toughness and Microstructure in TiB Particulate-reinforced Ti-6Al-2Sn-4Zr-2Mo Composites
نویسندگان
چکیده
منابع مشابه
Microstructure and property of TiB-reinforced Ti alloy composites by laser metal deposition
TiB-reinforced Ti alloy composites have been laser deposited with pre-alloyed Ti-6Al4V-1B powder. The microstructure of the as-deposited and heat treated composites have been characterized in detail using scanning electron microscope (SEM). A homogeneous dispersion of needle-like TiB precipitates is formed in the Ti-6Al-4V α/β matrix. TiB precipitates promote formation of small near equaxed α/β...
متن کاملFracture Toughness of Polypropylene-Based Particulate Composites
The fracture behaviour of polymers is strongly affected by the addition of rigid particles. Several features of the particles have a decisive influence on the values of the fracture toughness: shape and size, chemical nature, surface nature, concentration by volume, and orientation. Among those of thermoplastic matrix, polypropylene (PP) composites are the most industrially employed for many di...
متن کاملTHE ROLE OF MICROSTRUCTURE ON VARIOUS STAGES OF THE VERY HIGH CYCLE FATIGUE BEHAVIOR OF AN a + ß TITANIUM ALLOY, TI-6Al-2Sn- 4Zr-6Mo (PREPRINT)
The very high cycle fatigue behavior (10-10 cycles) of Ti-6246 has been investigated using ultrasonic fatigue techniques. In this regime of fatigue (0.4-0.6σYS), only certain microstructural regions are susceptible to fatigue damage accumulation, and lifetimes are related to the distribution of fatigue critical microstructural neighborhoods. Three distinct categories of crystallographic crack i...
متن کاملWhisker alignment of Ti±6Al±4V/TiB composites during deformation by transformation superplasticity
We examine the eect of 10 vol.% TiB whisker reinforcement on transformation superplasticity of Ti±6Al±4V, induced by thermal cycling about the a/b phase transformation range of the matrix under a uniaxial tensile stress. During superplastic deformation, the whiskers gradually align along the external loading axis, as measured by electron back-scattering diffraction of deformed specimens. The c...
متن کاملFracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1998
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.84.6_452