Fracture Mechanics Modelling of Cracked Aluminium Panel Repaired with Bonded Composite Circular Patch
نویسندگان
چکیده
منابع مشابه
Recognition of Ae Signals from Fatigue-cracked and Patch-repaired Aluminum Panel
The fatigue crack growth behavior of a cracked and patch-repaired AA2024-T3 panel has been monitored by acoustic emission (AE). It was found that the overall crack growth rate was reduced and the crack propagation into the adjacent rivet hole was also retarded by introducing the patch repair. AE signals due to crack growth after the patch repair and those due to disbonding of the aluminum-patch...
متن کاملResidual Strength Improvement of an Aluminium Alloy Cracked Panel
This work deals with the application of the micromechanical Gurson-Tvergaard (GT) model to the determination of the residual strength of analuminumflat stiffened panel (2024 T3) with a central through crack, by means of finite element simulations. The load condition is represented by a monotonic traction along the direction orthogonal to the crack plane. The used Finite Element code is WARP 3D,...
متن کاملDynamic response of a repaired composite beam with an adhesively bonded patch under a harmonic peeling load
The dynamic response of repaired composite beams under a harmonic peeling load was studied theoretically and experimentally. The repair method was based on removal of the damaged region and bonding a composite patch into the gap with adhesive. In the theoretical part, the equations of motion in the axial and transverse directions were derived assuming that the viscoelastic adhesive layer resist...
متن کاملThe mixed mode fracture mechanics in a hole plate bonded with two dissimilar plane
In the present research, the mixed-mode fracture mechanics analysis in a plate with central hole under tensile loading is considered. It is assumed that a plate containing two symmetrical hole-edge cracks is bonded with two dissimilar planes. The stress intensity factors at the crack tips are calculated. The problem is modeled in Casca software and this model is analyzed with Franc software. Th...
متن کاملResearch on Problems of Fracture Mechanics About the Spur Gears with Cracked Tooth
Taking the spur gear as the object of study, based on the dynamic analysis of gear transmission system, the dynamic stress intensity factors of cracked gear teeth are studied by using ANSYS software. The calculation of dynamic stress intensity factor is realized by ANSYS parametric design language. Firstly, the involute tooth profile equation and the root transition curve equation of the gear t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Sciences
سال: 2006
ISSN: 1812-5654
DOI: 10.3923/jas.2006.2088.2095