Fracture Behavior of Woven Cloth Reinforced Composites. I. Internal Stress Distribution and Static Behavior.
نویسندگان
چکیده
منابع مشابه
an inverstigation into the shrinkage behavior (kinetics) of microfilled hybrid and nano dental composites
چکیده ندارد.
15 صفحه اولCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملEffect of Moisture Absorption on the Tensile Behavior of Woven Hybrid Natural Fiber Reinforced Polymer Composites
Natural fibers are receiving considerable attention as substitutes for synthetic fiber reinforcements such as glass in polymer due to their low density, low cost, acceptable specific strength, reduced tool wear and respiratory irritation and renewable resources. The fibers are not uniformly distributed in the randomly oriented fiber reinforced hybrid composites due to manual lay-up and fibers a...
متن کاملFlexural Behavior of Cementitious Composites Reinforced by Synthetic Fibers
The application of fibers to reinforce cementitious materials is a well-known subject. At first, asbestos fibers are used in industrial process to produce fiber reinforced cement sheets. Thereafter, various types of synthetic fibers are produced and used as asbestos substitutes. The aim of the present work is to evaluate the effect of synthetic fibers on the flexural behavior of cementitious co...
متن کاملImpact Damage in Woven Fabric Reinforced Composites
INTRODUCTION Very often, woven fabrics are used as the reinforcement in advanced composite materials. Although the resulting inplane stiffness is lower than of their unidirectional counterparts, the excellent drapability of these materials eases the production of more general doubly curved components. In addition, the inherently low out-of-plane strength of these layered materials improves due ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1992
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.41.680