Fracture behavior of glass bead filled epoxies: Cleaning process of glass beads
نویسندگان
چکیده
منابع مشابه
Computational Simulation of Ablation Phenomena in Glass-filled Phenolic Composites
A one–dimensional, transient and thermal degradation model for predicting responses of composite materials when are exposed to the fire is presented. The presented model simulates ablation of composites with different layers of materials and considers material properties as functions of temperature. The reactions are modeled by using Arrhenius-type parameters and density-temperature diagram...
متن کاملRetention of platelets by glass bead filters.
Whole blood was passed through glass bead filters and the retention of platelets studied under various experimental conditions. Platelet retention was similar over a wide range of blood flow rates; however, it was decreased at fast rates of flow. Platelet retention was not influenced by the haematocrit value of the blood over a wide range. Retention in filters containing siliconized beads was s...
متن کاملMechanical performance and fracture behavior of Fe41Co7Cr15Mo14Y2C15B6 bulk metallic glass
The mechanical properties of a new Fe41Co7Cr15Mo14Y2C15B6 bulk glassy alloy were studied by impact bending, compression, and hardness tests carried out at room temperature. The compressive fracture strength, elastic strain to fracture, Young’s modulus and Vickers hardness were measured to be 3.5 GPa, 1.5%, 265 GPa, and 1253 kg mm, respectively. The fracture mode of the glassy alloy under uniaxi...
متن کاملGlass Bead Calorimeter and Fiber Optic Readout
Large volume calorimeters are traditionally based on construction from high-density material or a “sandwich” construction of alternating layers of active and passive material. Dense scintillating material, made from materials such as BGO or lead-glass, is too costly to be used on a very large scale. In sandwich technology, energy resolution is often reduced due to a large fraction of the signal...
متن کاملExperimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)
The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Polymer Science
سال: 2000
ISSN: 0021-8995,1097-4628
DOI: 10.1002/1097-4628(20010222)79:8<1371::aid-app40>3.0.co;2-o