Fracture and fatigue in aluminum alloy matrix composite material.
نویسندگان
چکیده
منابع مشابه
Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy
In the presented article, the temperature effect was studied on creep properties and fracture behaviors of AlSi12Cu3Ni2MgFe aluminum-silicon alloys, unreinforced and reinforced with SiO2 nano-particles. For such objective, standard specimens were fabricated by gravity casting and stir-casting methods, for aluminum alloys and nano-composites, respectively. Then, force-controlled creep...
متن کاملPorosity Control and Fatigue Behavior in A356-T61 Aluminum Alloy
Much work has been done, in recent years, to characterize the factors that cause porosity in aluminum castings, and to analyze the impact of porosity or microstructural parameters on fatigue life. What has yet to be done is systematically separate out the effects of dendrite arm spacing and largest pore size from each other, and from the underlying chemical and process parameters that influence...
متن کاملThe Effect of Creep Aging on the Fatigue Fracture Behavior of 2524 Aluminum Alloy
Normal temperature tensile and fatigue tests were adopted to test the mechanical performance and fatigue life of 2524 aluminum alloy under the three states of T3, artificial aging, and creep aging, and scanning electron microscope and transmission electron microscope were also used to observe the fatigue fracture morphology and aging precipitation features of the alloy under the above three sta...
متن کاملdevelopments in conventional machining of aluminum matrix composite material: a review
aluminium matrix composites (amcs) materials are continuously displacing traditional engineering materials because of their advantages of high stiffness and strength over homogeneous material formulations. properties of amcs can be tailored to the demands of different industrial applications by suitable combinations of matrix, reinforcement and processing route. presently, several grades of amc...
متن کاملMaterial and Information Flows Pertaining to Aluminum Alloy Pipe Distribution
D. Simić, J. Tepić, V. Gajić, I. Kovačević, B. Lalić, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia This paper discusses the distribution fl ow of aluminum (Al) alloy pipes, starting with the completion of the manufacturing process and fi nal inspection. The proposed solution considers the use of bar-coded caps produced from recycled polymer materials that are placed o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1995
ISSN: 0451-5994
DOI: 10.2464/jilm.45.610