Fractional Recrystallization Behavior of Impurity-Doped Commercially Pure Aluminum
نویسندگان
چکیده
منابع مشابه
Fatigue and Fracture Behavior of a Cold-Drawn Commercially Pure Aluminum Wire
Fatigue properties and cracking behavior of cold-drawn commercially pure aluminum wires (CPAWs) widely used as the overhead transmission conductors were investigated. It was found that the fracture surface of the CPAWs shows an obvious four-stage fracture characteristic, i.e., crack initiation, planar crack propagation, 45°-inclined crack propagation and final rapid fracture. The crack growth m...
متن کاملInvestigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملUltrasonic Monitoring of Recrystallization Textures in Aluminum
The present paper is an attempt to use ultrasonic velocity measurements to characterize the texture of an aluminum-magnesium alloy ( Al 5xxx ) and to compare the results with orientation imaging microscopy ( OIM ) results. The results are characterized in terms of three orientation distribution coefficients ( ODC's ), W400 , W420 , and W440 , each of which describes a particular forming anisotr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Energy Mechanical Material and Manufacturing Engineering
سال: 2020
ISSN: 2548-4281,2541-6332
DOI: 10.22219/jemmme.v5i2.11675