Fractional Distillation Process Utilized to Produce Light Fractional Fuel from Low Density Polyethylene (LDPE) Waste Plastic
نویسندگان
چکیده
منابع مشابه
Fractional Distillation Process Utilized to Produce Light Fractional Fuel from Low Density Polyethylene (LDPE) Waste Plastic
Plastics are not easily biodegradable; and because of these characteristics they can remain under landfill and water for a very long period of time. All over the world only 6% of waste plastics are recycled and the rest of all waste plastics are dumped into landfills. An experiment was conducted in a laboratory scale batch process under Labconco’s fume hood utilizing low density polyethylene (L...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملcatalytic conversion of waste low density polyethylene into fuel oil
waste low density polyethylenes (ldpe) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. the effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. the effect of catalyst o...
متن کاملOptimization of Injection Moulding Process Parameters in the Moulding of Low Density Polyethylene (LDPE)
Injection moulding is one of the most popular polymer processing methods due to its high production rate as well as its ability to produce very intricate geometries at very cheaper cost and within few seconds. There are several flaws which occur while producing plastic parts by Injection moulding, like warpage, shrinkage, flash, sink marks etc. Shrinkage is one of the most critical problems whi...
متن کاملEnvironmentally Harmful Low Density Waste Plastic Conversion into Kerosene Grade Fuel
Plastics wastes from a municipal solid waste (MSW) plant have a high-energy content and are suitable for fuel generation. Thermal cracking is one of the possible ways to obtain petrochemical feedstock from polymer wastes. Municipal waste plastic of LDPE conversion to kerosene grade fuel experiments were carried out under atmospheric conditions at temperatures between 150 ̊C and 420 ̊C. Low densit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Fuels & Energy Science Journal
سال: 2012
ISSN: 1876-973X
DOI: 10.2174/1876973x01205010039