Fractional determination of metallic copper, cuprous oxide and cupric oxide in copper oxide catalyst.
نویسندگان
چکیده
منابع مشابه
Cupric oxide inclusions in cuprous oxide crystals grown by the floating zone method
Phase-pure cuprous oxide (Cu2O) crystals are difficult to grow since cupric oxide can form within the crystal as the crystal is cooled to ambient conditions. Vacancies are the solute which causes precipitation of macroscopic defects. Therefore, even when a mostly phase-pure single crystal is used as a feed rod, cupric oxide inclusions persist in the recrystallized solid. Control of the thermal ...
متن کاملBiological Synthesis of Copper/copper Oxide Nanoparticles
Metal nanoparticles have gained significant interest in the past decade because of their unique physio-chemical properties which has a potential to be used in a wide range of applications. Recent efforts have gained success in synthesising nanoparticles with excellent shape and size control; however they are largely restricted to chemical methods. There is an increasing focus on eco-friendly ‘g...
متن کاملUltrasonic Fabrication of Monodispersed Nano-Copper Oxide
A green environmental friendly process for preparing monodispersed cuprous oxide nanoparticles is reported. In this process, cuprous oxide is prepared using Cu(OH)42- as precursor and glucose as reducing agency in the presence of dispersant under ultrasonic radiation. Spherical, welldispersed Cu2O nanoparticles were obtained with the average size of 200 nm or 1.5 μm, respectively, with or witho...
متن کاملThe Combined Effect of Copper Oxide and Magnesium Oxide Nanoparticles Against Water and Food Borne Bacteria
Background: The incidence of foodborne infectious diseases has been stable and even increased in many countries. Improper use of antibiotics due to the prevalence of microbial diseases has caused drug resistance. So nanotechnology has many attractive applications in the food industry, such as food preservation and food quality control. By the reason, the absorptive and antibacterial features of...
متن کاملFormation of Cupric Oxide Films on Quartz Substrates by Annealing the Copper Films
In the present work, cupric oxide (CuO) films were obtained through thermal annealing of the copper (Cu) films deposited on quartz substrates by DC magnetron sputtering method. The annealing was performed in air atmosphere for different times ranging from 60-240 min at temperature of 400 ºC. The influence of annealing times on structural and morphological properties of the films was investi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1990
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.39.t1