Fractal FSS: a novel dual-band frequency selective surface
نویسندگان
چکیده
منابع مشابه
Fractal FSS: a novel dual-band frequency selective surface - Antennas and Propagation, IEEE Transactions on
The multiband properties of self-similar fractals can be advantageously exploited to design multiband frequency selective surfaces (FSS). A Sierpinski dipole FSS has been analyzed and measured and the results show an interesting dual-band behavior. Furthermore a near-field measurement technique is applied to characterize the FSS response to different angles of incidence. Finally, it will be sho...
متن کاملA dual-band fractal FSS with SZ curve elements
A novel dual-band miniaturized frequency selective surface adopting fractal elements is proposed. The proposed structure is composed of interconnected four SZ curves of second generation. Such a design is to provide two pass-bands with stable performance, the first band resonates at S-band with a center frequency of 3.02GHz and the second band is at C-band centered at 7.22GHz. In addition, the ...
متن کاملDual band FSS with fractal elements - Electronics Letters
reverse link transmission model. The single mobile user is assumed to continuously transmit information data at 64kbit/s. The data are divided into a sequence of 5120bit data frames. Frame data are frst 16bit CRC encoded and then turbo encoded with coding rate of 1/3 and generator polynomials of 1, 517, 5/7 in octal notation (the two RSC encoders are the same and have a constraint length of 3 b...
متن کاملDual-band and Enhanced Band Fss Characterization Using Wcip Method
Wave concept iterative procedure (WCIP) is used to analyze dual-band and enhanced band frequency selective surfaces (FSS). In the metallic U-shaped simple FSS, a fine-tune of the two rejected bands is insured by varying independently the length of the two parallel U-shaped FSS strips. The dual band response can also be obtained from the two-level rectangular conducting patches FSS. An enhanced ...
متن کاملStudy on Dual Wide Band Frequency Selective Surface for Different Incident Angles
This paper deals with single layer Frequency selective surface (FSS) which acts as a double band reject filter. The two stop bands are really broad with percentage bandwidth of 26.67% and 14.53%. The maximum and minimum band separation for this proposed design is around 45 dB and frequency ratio is more than 1.9.This results are almost same for different incident angles.. This design is investi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Antennas and Propagation
سال: 2000
ISSN: 0018-926X
DOI: 10.1109/8.876329