Fossil Energy. Co-Pyrolysis of Coal, Biomass and Waste Plastics.

Plasma pyrolysis and gasification of plastics waste – a review

Plasma pyrolysis integrates thermo-chemical properties of plasma using pyrolysis process for safe disposal of solid wastes. It is an environment friendly technology to generate valuable byproducts by converting municipal solid waste, biomedical waste and hazardous wastes at 800-1000°C. Plasma Pyrolysis of plastic wastes generates pyrolysis gas, which can be utilized for energy recovery via diff...

Injection of coal and waste plastics in blast furnaces

The majority of waste plastics currently produced are either landfilled or incinerated. Plastics do not readily degrade and toxic elements can be leached from the landfill. Combustion of waste plastics can generate environmentally hazardous air pollutants such as dioxins/furans, as well as undesirable carbon dioxide. Consequently, cost effective ways of recycling the increasing amounts of gener...

New Correlations for Coal and Biomass Pyrolysis Performances with Coal-Biomass Type Number and Temperature

The pyrolysis of coal and biomass is generally reported as the mass yield of released chemicals at various temperatures, pressures, heating rates and coal or biomass type. In this work, a new coal-biomass type number, NCT, is introduced. This number is constructed from the mass fractions of carbon, hydrogen, and oxygen in the ultimate analysis. This number is unique for each coal or biomass typ...

Electrical and Electronic Plastics Waste Co-Combustion with Municipal Solid Waste for Energy Recovery

Coal and plastic waste co - pyrolysis by thermal analysis - mass spectrometry

Simultaneous thermogravimetry-mass spectrometry studies of a pyrolytic decomposition of mixtures of different plastic wastes/coking coal were carried out. The investigation was performed at temperatures up to 1000oC in a helium atmosphere under dynamic conditions at a heating rate of 25 oC/min. Five thermoplastics, commonly found in municipal wastes: low density polyethylene (LDPE), high densit...