Forward modeling using finite difference method for fractured hard rocks tracing via three-electrode array
نویسندگان
چکیده
منابع مشابه
Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method
Considering the fact that a large volume of iron reserve in the Sechahoon Iron Mine in Yazd Province has located under the water table, it is necessary to conduct a comprehensive study on water flow within the pit and its surroundings. The conceptual model of the aquifer was created using surface and underground geological information compared with water table data of the area of interest. In t...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
An optimized variable-grid finite-difference method for seismic forward modeling
An optimized fourth-order staggered-grid finitedifference (FD) operator is derived on a mesh with variable grid spacing and implemented to solve 2-D velocity-stress elastic wave equations. The idea in optimized schemes is to minimize the difference between the effective wave number and the actual wave number. As expected, this optimized variable-grid FD scheme has less dispersion errors than th...
متن کاملMPI- and CUDA- implementations of modal finite difference method for P-SV wave propagation modeling
Among different discretization approaches, Finite Difference Method (FDM) is widely used for acoustic and elastic full-wave form modeling. An inevitable deficit of the technique, however, is its sever requirement to computational resources. A promising solution is parallelization, where the problem is broken into several segments, and the calculations are distributed over different processors. ...
متن کاملSurface impedance modeling using the finite-difference time-domain method
The finite-difference time-domain (FDTD) technique has been used to model the one-dimensional (1-D) surface impedance of a lossy earth plane having discontinuities in two and three dimensions. Using a horizontal magnetic field aperture source located five cells from an absorbing boundary and 35 cells above the lossy earth plane, the surface impedance was accurately modeled at a distance of 0=50...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Geofizicheskiy Zhurnal
سال: 2013
ISSN: 2524-1052,0203-3100
DOI: 10.24028/gzh.0203-3100.v35i3.2013.116423