Formulation engineering of water-in-oil-in-water emulsions for salt reduction with sucrose oleate as a PGPR-alternative lipophilic emulsifier

نویسندگان

چکیده

Sucrose oleate was assessed as an alternative lipophilic emulsifier to polyglycerol polyricinoleate (PGPR) for the stabilisation of internal aqueous phase a water-in-oil-in-water emulsion formulation designed salt release from during oral processing. A water-in-oil (30 g water/100 oil), containing internalised solution (1.5 salt/100 g), successfully incorporated droplets into external (0.5 g) with in-situ gelatinised waxy rice starch (WRS) stabilising oil droplet interface. The sucrose ester stabilised were aggregated, and this microstructure carried over emulsion. PGPR showed no evidence aggregation, primary size smaller. Mean comparable, slightly increasing 3-months observation period. Nevertheless, encapsulation efficiency, reducing by around 10% 3-months, well in vitro release, 20%, comparable. This study demonstrated that SE O-170 is viable w/o/w emulsions

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Systematic characterization of oil-in-water emulsions for formulation design.

Oil-in-water emulsions varying in surfactant concentration and manufacturing process were prepared. About 10 experiments were performed to characterize them. The goal of this research was to find out which tests should systematically be carried out to assess efficiently the stability and the properties of an emulsified preparation. Thus, formulation design requires at least the measurement of t...

متن کامل

Thermodynamic Stability of Water-in-oil Emulsions

It is well known that colloids can show phase transitions similar to the ones observed in molecular systems. Colloid-diluted and colloid-concentrated phases can coexist in thermodynamic equilibrium at certain conditions. In a previous work, the authors of this research have used this concept to study petroleum emulsions stability, applying thermodynamic perturbation theories to calculate a phas...

متن کامل

Hydrophilic PDMS microchannels for high-throughput formation of oil-in-water microdroplets and water-in-oil-in-water double emulsions.

Here we present a novel surface modification method based on the sequential layer-by-layer deposition of polyelectrolytes yielding hydrophilic microchannels in PDMS-based microfluidic devices. The coatings are long-term stable and allow for the generation of monodisperse oil-in-water microdroplets even several months after the channel surface treatment. Due to the robustness of the polyelectrol...

متن کامل

Optimization of Demulsifier Formulation for Separation of Water from Crude Oil Emulsions

In this study, various water-soluble and oil-soluble demulsifiers were selected for separation of water from crude oil emulsions and their productivity measured using the Bottle-test method at 70 °C and 10 ppm concentration. The best ones among 23 demulsifiers examined through the screening process were fatty alcohol ethoxylate, triethanol amine and urea from the water-soluble group and Basoror...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Food structure

سال: 2023

ISSN: ['1046-705X']

DOI: https://doi.org/10.1016/j.foostr.2023.100309