Formulation and Thermomechanical Characterization of Earth-based Biosourced Composites: Cases of Clay-Hibiscus cannabinus L. Fiber, Clay-sawdust and Clay- Oryza sativa Husk

Effects of Fiber Reinforcement on Clay Aerogel Composites

Novel, low density structures which combine biologically-based fibers with clay aerogels are produced in an environmentally benign manner using water as solvent, and no additional processing chemicals. Three different reinforcing fibers, silk, soy silk, and hemp, are evaluated in combination with poly(vinyl alcohol) matrix polymer combined with montmorillonite clay. The mechanical properties of...

Synthesis and Characterization of Porous Clay Heterostructures

Porous clay heterostructures (PCH) based on modified montmorillonite were synthesized using different reaction conditions (different hydration degrees, pH values and reaction times). The PCH precursors and PCH were characterized using FTIR Spectroscopy and X-Ray Diffractions (XRD). The XRD results showed that basal distance of porous clay heterostructures was significantly influenced by the mod...

Geotechnical Characterization of Mined Clay from Appalachian Ohio: Challenges and Implications for the Clay Mining Industry

Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for ...

Clay exfoliation and polymer/clay aerogels by supercritical carbon dioxide

Supercritical carbon dioxide (scCO2) treatments of a montmorillonite (MMT) intercalated with ammonium cations bearing two long hydrocarbon tails (organo-modified MMT, OMMT) led to OMMT exfoliation, with loss of the long-range order in the packing of the hydrocarbon tails and maintenance of the long-range order in the clay layers. The intercalated and the derived exfoliated OMMT have been deeply...

Clay and non-clay minerals in the pharmaceutical industry