Forming simulation of thermoplastic pre-impregnated textile reinforcement by finite element method
نویسندگان
چکیده
منابع مشابه
Friction in Textile Thermoplastic Composites Forming
A previously developed mesoscopic friction model for glass/PP textile composite laminates during forming is evaluated for glass and carbon/PPS laminates, at higher temperatures and lower viscosities than before. Experiments were performed for tool/ply and ply/ply configurations in a new friction test set-up. The experimental results indicate that this contact is indeed in the hydrodynamic regim...
متن کاملSimulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
Mechanical properties of alloys have a strong relation with microstructure and determination of their behavior can lead to multiple advantages. To obtain this goal, finite element method )FEM( is one of the best ways. In this study a series of experiments were carried out on the produced Ti-6Al-4V to obtain its mechanical characteristics and to prepare it for photographing in micro dimensions. ...
متن کاملFinite element simulation of two-point incremental forming of free-form parts
Two-point incremental forming method is considered a modern technique for manufacturing shell parts. The presence of bottom punch during the process makes this technique far more complex than its conventional counterpart i.e. single-point incremental forming method. Thus, the numerical simulation of this method is an essential task, which leads to the reduction of trial/error costs, predicts th...
متن کاملFinite Element Simulation of Textile Materials at the Fiber Scale
A general approach to simulate the mechanical behavior of textile materials by taking into account all their constitutive elementary fibers and contacts between them is presented in this paper. A finite element code, based on an implicit solver, is develop to model samples of woven fabrics as assemblies of beams submitted to large displacements and developing contact-friction interactions betwe...
متن کاملForming simulation of a thermoplastic commingled woven textile on a double dome
This paper presents thermoforming experiments and FE simulations of a commingled glass-PP woven composite on a double dome geometry, with the aim of assessing the correspondence of predicted and experimental shear angles. Large local deformations especially in-plane shear, i.e. relative rotation between the two yarn families – occur when draping a textile on a three dimensional part and eventua...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the JSME (in Japanese)
سال: 2014
ISSN: 2187-9761
DOI: 10.1299/transjsme.2014smm0354