Forming of Tailor Blanks Having Local Thickeningfor Deep Drawing of Square Cups
نویسندگان
چکیده
منابع مشابه
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملPrediction of Tensile and Deep Drawing Behaviour of Aluminium Tailor-Welded Blanks
Tailor-welded blanks (TWB) are blanks with sheets of similar or dissimilar thicknesses, materials, coatings welded in a single plane before forming. Applications of TWB include car door inner panel, deck lids, bumper, side frame rails etc. in automotive sector (Kusuda et al., 1997; Pallet & Lark, 2001). Aluminium TWBs are widely used in automotive industries because of their great benefits in r...
متن کاملDeep Drawing Simulation of Tailored Blanks
†Hoogovens Research and Development, Product Application Centre, P.O. Box 10000, 1970 CA IJmuiden, The Netherlands, e-mail: [email protected] *University of Twente, Faculty of Mechanical Engineering, P.O. Box 217, 7500 AE Enschede, The Netherlands, e-mail: [email protected] Automotive Tailored Blanks, P.O. Box 505, 3750 GM Bunschoten, The Netherlands, e-mail: bstokman@automoti...
متن کاملPrediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network
Tailor-made blanks are sheet metal assemblies with different thicknesses and/or materials and/or surface coatings. A monolithic sheet can be machined to make the required thickness variations that is referred as tailor machined blanks. Due to the thickness variation in tailor machined blanks, laser bending of these blanks is more complicated than monolithic plates. In this article, laser formin...
متن کاملinvestigation of the effects of process parameters on the welding line movement in deep drawing of tailor welded blanks
in this paper, the deep drawing process of tailor welded blanks is simulated using the finite element modelling and verified using the experimental results available in the literature. then the effect of die and material properties on the welding line movement is investigated. it is seen that the most effective material parameters on weld line movement are different between sheet metal thicknes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Technology of Plasticity
سال: 2009
ISSN: 0038-1586,1882-0166
DOI: 10.9773/sosei.50.1044