Formation of Turbulent Eddies in Jet Diifusion Flames.
نویسندگان
چکیده
منابع مشابه
Modeling soot formation in turbulent kerosene/air jet diffusion flames
Soot volume fraction and number density in a turbulent diffusion flame burning kerosene/air were predicted using two approaches. The first used a conventional soot inception model based on the acetylene concentration and is referred to as the acetylene model. The second used a soot inception model based on the formation rate of three and two ring aromatics [1] and is referred to as the PAH ince...
متن کاملCharacteristics of Turbulent Nonpremixed Jet-flames and Jet-flames in Crossflow in Normal- and Low-gravity
It is well known that buoyancy has a major influence on the flow structure of turbulent nonpremixed jet flames. For example, previous studies have shown that transitional and turbulent jet flames exhibit flame lengths that are as much as a factor of two longer in microgravity than in normal gravity. The objective of this study is to extend these previous studies by investigating both mean and f...
متن کاملLES modeling for lifted turbulent jet flames
The LES method is an attractive approach for the simulation of turbulent jet flames. In this method, the effects of large scale structures controlling the mixing process are resolved while small-scale effects such as the leading-edge flames involved in the flame base dynamics are accounted for by the subgrid-scale models. The LES approach is examined in this study with a particular emphasis on ...
متن کاملRadiation and Nitric Oxide Formation in Turbulent Non-premixed Jet Flames
Radiative heat transfer has a significant effect on nitric oxide (NO) formation in turbulent non-premixed flames. Consequently, predictive models of turbulent non-premixed flames must include an accurate radiation submodel. To investigate the importance of radiation submodels in modeling NO formation, multiscalar measurements of temperature and species were coupled with radiation measurements i...
متن کاملStudies on Soot Formation and Combustion in Turbulent Spray Flames: Modeling and Experimental Measurement
The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1993
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.59.3271