Formation of topologically closed packed phases within CMSX-4 single crystals produced by additive manufacturing
نویسندگان
چکیده
منابع مشابه
Additive manufacturing of micrometric crystallization vessels and single crystals
We present an all-additive manufacturing method that is performed at mild conditions, for the formation of organic single crystals at specific locations, without any photolithography prefabrication process. The method is composed of two steps; inkjet printing of a confinement frame, composed of a water soluble electrolyte. Then, an organic semiconductor solution is printed within the confinemen...
متن کاملIntermediate Temperature Creep Deformation in Cmsx-3 Single Crystals
Creep deformation in < 001 > oriented single crystals of CMSX-3 has been studied at temperatures around 850°C at a stress level of 552 MPa. Detailed observations of the evolution of the dislocation structure during creep have been made. TEM stereo pairs show creep deformation in the matrix phase, leaving the 7’ precipitates undeformed. In previously undeformed crystals there is a brief incubati...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولEvaluation of SHM System Produced by Additive Manufacturing via Acoustic Emission and Other NDT Methods
During the last decades, structural health monitoring (SHM) systems are used in order to detect damage in structures. We have developed a novel structural health monitoring approach, the so-called "effective structural health monitoring" (eSHM) system. The current SHM system is incorporated into a metallic structure by means of additive manufacturing (AM) and has the possibility to advance life...
متن کاملProcess Mapping, Fracture and Fatigue Behavior of Ti-6al-4v Produced by Ebm Additive Manufacturing
The present work was conducted as part of a larger America Makes funded project to begin to examine the effects of changes in process variables on the resulting microstructure and fracture and fatigue behavior of as-deposited Ti-6Al-4V. In addition to presenting initial results on process mapping of the electron beam powder bed process, the present work also documents the location-dependent pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Letters: X
سال: 2019
ISSN: 2590-1508
DOI: 10.1016/j.mlblux.2019.100003