Formation of the Workpiece Shape and Surface Finish During Electrical Discharge Machining
نویسندگان
چکیده
منابع مشابه
Thermal Analysis of Workpiece under Electrical Discharge Machining (EDM), Using Hyperbolic Heat Conduction Model
Whereas in electrical discharge machining (EDM) the heat flux entering the workpiece is extremely high, the Fourier heat conduction model may fails. This article reports on determination of temperature distribution in the workpiece due to EDM using non-Fourier heat conduction model. Equations are solved by deriving the numerical solution. The temperature layers and profiles of sample calculatio...
متن کاملthermal analysis of workpiece under electrical discharge machining (edm), using hyperbolic heat conduction model
whereas in electrical discharge machining (edm) the heat flux entering the workpiece is extremely high, the fourier heat conduction model may fails. this article reports on determination of temperature distribution in the workpiece due to edm using non-fourier heat conduction model. equations are solved by deriving the numerical solution. the temperature layers and profiles of sample calculatio...
متن کاملMechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE)
Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...
متن کاملEnhanced osteoblast response to electrical discharge machining surface.
The purpose of this study is to investigate the surface characteristics and biocompatibility of titanium (Ti) surfaces modified by wire electrical discharge machining (EDM). EDM surface characteristics were evaluated by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), thin-film X-ray diffractometry (XRD) and contact angle measurements. MC3T3-E1 cell morphology, attach...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2018
ISSN: 2212-8271
DOI: 10.1016/j.procir.2017.12.071