Formation of Surface Depression during Continuous Casting of High-Al TRIP Steel
نویسندگان
چکیده
منابع مشابه
Physical Modeling of Steel Delivery during Thin Slab Continuous Casting
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...
متن کاملContinuous Casting of Steel
Continuous casting is used to solidify most of the 750 million tons of steel produced in the world every year. Like most commercial processes, continuous casting involves many complex interacting phenomena. Most previous advances have been based on empirical knowledge gained from experimentation with the process. To further optimize the design and improve the continuous casting process, mathema...
متن کاملSUBMERGED ENTRY NOZZLE CLOGGING DURING CONTINUOUS CASTING OF Al-KILLED STEEL
F. Tehovnik, J. Burja, B. Arh, Institute of metals and technology, Ljubljana, Slovenia, M. Knap, University of Ljubljana, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia Nozzle clogging is a common problem in the production of continuously cast Al-killed steels. Clogging occurs when there are solid inclusions in molten steel at casting temperatures. SENs (Submerged entry nozzle...
متن کاملphysical modeling of steel delivery during thin slab continuous casting
a full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (sen) was constructed. on the basis of the dimensionless reynolds and froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. in order to determine the optimum ope...
متن کاملThe Influence of Hematite on High Speed Continuous Casting of Steel Lubricating Powders: Viscosity and Crystallization
Mold powders used in the continuous casting of steel contain the harmful CaF2 as a main substance developing toxic gases such as SiF4 and HF at elevated temperatures. In this study, three samples of I1, I2 and I3, which contained gypsum free Portland cement clinker with different percentages of Fe2O3 (5.68, 6.83, 8.02 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9020204