Formation of strippable metabolic products in biological waste treatment
نویسندگان
چکیده
منابع مشابه
Biological Treatment of Mercury Waste
A widely used method for removing mercury from polluted water is addition of sodium sulfide. Insoluble mercuric sulfide (HgS), which forms is removed as a sludge (Price et al. 1972) that is then landfilled. It has been assumed that HgS remains permanently insoluble, thus preventing movement of mercury into the surrounding environment. Mercury waste has been treated and buried in this manner for...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولThe Biological Purification of Waste Products from Olive Oil Extraction
Aspergillus terreus gave the overall best results in alpechin at approximately 80% concentration, degrading organic material by 53%, expressed as COD, and 67%, expressed as BOD. Degradation of the total phenol content, which included the great majority of phenolic compounds, reached 69%.
متن کاملPilot project of mechanical-biological treatment of waste in Brazil.
By mechanical-biological treatment (MBT) of residual municipal solid waste the behaviour of landfills can be significantly improved. After MBT the organic content (COD and BOD5), total organic carbon, and total nitrogen in the leachate, as well as the gas production rate, are reduced to values lower than 90% of the fresh untreated waste. The volume of the stabilized material to be disposed on l...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biotechnology and Bioengineering
سال: 1977
ISSN: 0006-3592,1097-0290
DOI: 10.1002/bit.260190815