Formation of Solid Splats During Thermal Spray Deposition
نویسندگان
چکیده
منابع مشابه
A splats obtaining system for thermal spray deposits
The image of thermal spray splats is difficult to collect due to its high velocity of droplets. Especial in High Velocity Oxy-Fuel (HVOF) process, the process present higher velocity of flame jet correlated to other thermal spray process. The system presents at this article describes a useful splats catching method to obtaining splats during thermal spray deposited. Capabilities and advantages ...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Modeling of Particle Formation during Spray Drying
A mathematical model for the evaporation of a single droplet, subjected to convective drying in a spray dryer was developed to study the transient phenomena of particle formation. During the constant-rate drying period, the governing equations and boundary conditions were transformed into a form containing Peclet number, Pe, as the main controlling parameter. A numerical solution was developed ...
متن کاملModeling of Heat Flow and Solidification during Spray Deposition Process
The solidification behavior of droplets as well as spray-deposit of Al-4.5 wt% Cu alloy is simulated by modeling based on heat flow analysis. The model incorporates droplet dynamics and their thermal states during atomization process. The resultant spray enthalpy is used to analyze heat flow during solidification of the spray deposit. The effect of process variables like atomization pressure, m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermal Spray Technology
سال: 2009
ISSN: 1059-9630,1544-1016
DOI: 10.1007/s11666-009-9294-5