Formation of Non-Metallic Inclusion and Acicular Ferrite in Ti–Zr Deoxidized Steel
نویسندگان
چکیده
منابع مشابه
Lattice Misfit between Inclusion and Acicular Ferrite in Weld Metal of Low Carbon Low Alloy Steel
To clarify the mechanism of acicular ferrite formation in low carbon submerged arc weld metals of a Ti-B system with different aluminum contents, the lattice misfit between inclusion and acicular ferrite was investigated. The inclusions were directly sliced into thin foils by a focused ion beam device and crystallographic analyses were performed using a transmission electron microscope. These i...
متن کاملEffect of plastic deformation on the formation of acicular ferrite
The effect of plastic deformation on the transformation of austenite to acicular ferrite in a Fe /Mn /Si /C alloy steel containing non-metallic inclusions was investigated. The transformation to acicular ferrite is retarded and the final fraction of acicular ferrite is reduced in plastically deformed austenite, which is a characteristic of a displacive transformation mechanism. The increase in ...
متن کاملThe Discovery of Lower Acicular Ferrite
There is general agreement that a weld microstructure primarily containing acicular ferrite will exhibit high strength and excellent toughness due to its small grain size, high dislocation density, and the way in which the plates are dispersed in the microstructure (Pargeter, 1983; Sneider and Ken, 1984). In contrast, the presence of allotriomorphic ferrite, ferrite plates with aligned carbides...
متن کاملEffect of Inclusions on Acicular Ferrite Formation in Submerged Arc Welding of API5L-X65
In the present study, effect of inclusions characteristics changing on the formation of acicular ferrite in submerged arc welding of API5l-X65 low alloy steel was investigated. Three different welding fluxes with different chemical composition and basicity index of 0.72, 0.82 and 0.99, and two different welding heat inputs of 1.6 kJ / mm and 2.4 kJ / mm were used to create inclusions with diffe...
متن کاملEffect of Inclusions on Acicular Ferrite Formation in Submerged Arc Welding of API5L-X65
In the present study, effect of inclusions characteristics changing on the formation of acicular ferrite in submerged arc welding of API5l-X65 low alloy steel was investigated. Three different welding fluxes with different chemical composition and basicity index of 0.72, 0.82 and 0.99, and two different welding heat inputs of 1.6 kJ / mm and 2.4 kJ / mm were used to create inclusions with diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2019
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2019-008