Formation of Nano-Void and Characteristics of Nano-Particles in Material Physics-Review
نویسندگان
چکیده
منابع مشابه
synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants
we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.
15 صفحه اولextraction and characterization of allium irancum plant extract and its application in the green synthesis of silver nano particles and oxidation of thiocarbony1 compounds
سنتز سبز نانوذرات فلزی (nps) درسالهای اخیر توجه بسیارزیادی را به خود جلب کرده است. زیرا این پروتوکل کم هزینه وسازگار با محیط زیست از روش های استاندارد سنتز. در این پایان نامه ما گزارش میکنیم یک روش ساده و سازگار با محیط زیست برای سنتز نانوذرات نقره با استفاده از محلول آبی عصاره گیاه allium iranicum به عنوان یک عامل کاهش دهنده ی طبیعی. نانو ذرات نقره مشخص شد با استفاده از تکنیک های uv-visible، x...
Influence of Nano-Particles on Characteristics of MetakaolinContained Cement Paste
The influences of nano-ZrO2 (NZ), nano-TiO2 (NT), nano-Fe2O3 (NF) and nano-Al2O3 (NA) additions on properties of the fresh and hardened cement paste in comparison with the fine cement paste were experimentally studied. Mini slump and flow cone tests were conducted on fresh cement pastes. Moreover the compressive and tensile strength of hardened cement paste were measured. SEM micrographs and XR...
متن کاملStudy of the Formation of Nano-Networks in Colloidal Particles
Study of the Formation of Nano-Networks in Colloidal Particles Pooyath Lekshmy Venugopalan a , Gaurav Gupta b , Arijit Ghosh b , Haobijam Johnson Singh c , Greshma Nair a & Ambarish Ghosh a b c a Centre for Nanoscience and Engineering, Indian Institute of Science, Bangalore, India b Department of Electrical Communication Engineering, Indian Institute of Science, Bangalore, India c Department of...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering and Applied Sciences
سال: 2019
ISSN: 1816-949X
DOI: 10.36478/jeasci.2019.10169.10175