Formation of molybdenum carbide powders by CVD method.
نویسندگان
چکیده
منابع مشابه
Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method
In this study, mechanochemcical process(MCP) is applied to synthesize ultrafine TaC powders. In this research, nano powder composite TaC-TaB2 was produced using mixtures of tantalum carbide and boron carbide as raw materials via mechanochemical process. The phase formation characterization during process was utilized by X-ray diffractometry (XRD). The morphology of synthesized powder was studie...
متن کاملControl of eta carbide formation in tungsten carbide powders sputter-coated with (Fe/Ni/Cr)
Composite powders of tungsten carbide with variable coating contents of Fe/Ni/Cr based alloys (1–15 wt.%) were prepared by sputtering. The coated powders have revealed a good performance to shape-forming and sintering. However, the presence of nanocrystalline coatings could enhance the formation of a brittle phase during sintering, named g-phase, (M,W)6C. To investigate this effect, the powders...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولEquilibrium analysis of zirconium carbide CVD growth
A chemical equilibrium study was performed to investigate the effect of growth parameters on the constitution in ZrC films grown by chemical vapor deposition (CVD). The equilibrium analysis of the Zr–C–H system demonstrated that ZrC (fcc) deposition is favorable and that a certain minimum amount of hydrogen should prevent co-deposition of elemental carbon over a wide range of temperature, press...
متن کاملSYNTHESIS OF AL2O3-NI COMPOSITE POWDERS BY CO-PRECIPITATION METHOD
The synthesis of micro-sized, uniformly distributed Al2O3-15Vol% Ni powders were studied through three step co-precipitation of hydroxides mixtures from proper solution, calcination at air atmosphere and final step of calcined powders in a carbon bed. Al and Ni hydroxide and amorphous phase were first obtained from their salt’s solutions through chemical co-precipitation method by adjusti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1976
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.84.972_409