Formation of gradient porous composites from preceramic papers with Ti3SiC2 powder filler
نویسندگان
چکیده
This article is devoted to fabrication of gradient Ti3SiC2-based composites using preceramic papers as a feedstock. The initial raw material stack paper with Ti3SiC2 powder filler, the content which varies from 60 90% every three layers. were obtained by spark plasma sintering (SPS) method at 10 MPa pressure for min holding time. temperature was 1250 °C. microstructure and phase composition analyzed.
منابع مشابه
Potential of the magnesium powder as filler for biomedical composites
The intensive production of various biomedical composites made from different biomaterials showed a huge volume of information on properties of composite materials for appropriate research field. The matrix of composite materials is very important but the reinforcement materials known as fillers play an important role for the final properties of biomedical composites like mechanical properties ...
متن کاملPore Formation Process of Porous Ti3SiC2 Fabricated by Reactive Sintering
Porous Ti3SiC2 was fabricated with high purity, 99.4 vol %, through reactive sintering of titanium hydride (TiH2), silicon (Si) and graphite (C) elemental powders. The reaction procedures and the pore structure evolution during the sintering process were systematically studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). Our results show that the formation of Ti3SiC2 from ...
متن کاملIonically Bonded Filler-Elastomer Composites*
Tertiary amine-modified corn starches were converted to their basic or hydroxide form and combined with carboxylated butadiene-acrylonitrile copolymer and butadiene-styrene-sulfonic acid polymer to produce ionically bonded filler-elastomer composites. An increasing percentage of the elastomer fraction in the starch-elastomer composite is insolubilized as the starch-to-elastomer ratio increases....
متن کاملElectroconductive Composites from Polystyrene Block Copolymers and Cu–Alumina Filler
Technological advancements and development of new materials may lead to the manufacture of sustainable energy-conducting devices used in the energy sector. This research attempts to fabricate novel electroconductive and mechanically stable nanocomposites via an electroless deposition (ELD) technique using electrically insulating materials. Metallic Cu is coated onto Al₂O₃ by ELD, and the prepar...
متن کاملEco-Friendly Natural Filler Based Epoxy Composites
In this study, acrylated soybean oil (AESO) was used as modifying agent for DGEBF-type epoxy resin (ER). AESO was used as a co-matrix in 50 wt % with ER. Composites with ecofriendly natural fillers-banana bark and seashell were prepared. MNA was used as a hardener. Effect of banana peel (BP) and seashell (SSh) fillers on mechanical properties, such as tensile strength, elongation at break, and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2021
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/1989/1/012031