Formation of FeSi<SUB>2</SUB> from Sintered FeSi-Fe<SUB>2</SUB>Si<SUB>5</SUB> Eutectic Alloy
نویسندگان
چکیده
منابع مشابه
Au±Si eutectic alloy formation by Si implantation in polycrystalline Au
Dierent doses of high-energy Si (0.2±4.5 MeV) were implanted in polycrystalline Au foils (35 lm thick) to form a low melting point Au±Si alloy which can be used for gold soldering. A Au±Si eutectic structure has been observed in the implanted Au foils after annealing at 400°C for 1 h. The Au±Si liquid phase was diused in the polycrystalline Au foil along the grain boundaries which were ̄atten...
متن کاملAnomalous Halo Formation in an Arc-Melted ScNi-Sc2Ni Off-Eutectic Binary Alloy
Diverse non-equilibrium eutectic structures have attracted numerous experimental and theoretical studies. One special type is the formation of a halo of one phase around a primary dendrite of another phase. In our experiments, it was occasionally observed that ScNi halos grow as dendritic morphology around the primary Sc 2 Ni dendrites in an arc-melted ScNi-Sc 2 Ni off-eutectic binary alloy. Th...
متن کاملCharacterization of loose powder sintered porous titanium and Ti6Al4V alloy
Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...
متن کاملCritical temperature of the lead–bismuth eutectic (LBE) alloy
Liquid metals such as Bi and Pb and Pb–Bi eutectic alloy are serious contenders for use as coolant in LMFBRs in lieu of sodium due to a number of attractive characteristics (high density, low moderation, low neutron absorption and activation, high boiling point and poor interaction with water and air, etc.). Analysis of hypothetical accidents is of relevance to predict the catastrophe involving...
متن کاملCrystalline surface phases of the liquid Au-Si eutectic alloy
Oleg G. Shpyrko,1,2,* Reinhard Streitel,1 Venkatachalapathy S. K. Balagurusamy,1 Alexei Yu. Grigoriev,1 Moshe Deutsch,3 Benjamin M. Ocko,4 Mati Meron,5 Binhua Lin,5 and Peter S. Pershan1 1Department of Physics and School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, USA 2Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 604...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1984
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.48.8_843