Formation of Electroless Plating Patterns Using a Surface Modification Method by UV Irradiation
نویسندگان
چکیده
منابع مشابه
Polyimide surface modification by using microwave plasma for adhesion enhancement of Cu electroless plating.
Microwave (MW) plasma was applied to the surface of polyimide (PI) films as a treatment to enhance the adhesion between copper deposition layer and PI surface for electroless plating. The influences of nitrogen MW plasma treatment on chemical composition of the PI surface were investigated by using X-Ray photoelectron spectroscopy (XPS). The wettability was also investigated by water contact an...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملSurface modification of starch based biomaterials by oxygen plasma or UV-irradiation.
Radiation is widely used in biomaterials science for surface modification and sterilization. Herein, we describe the use of plasma and UV-irradiation to improve the biocompatibility of different starch-based blends in terms of cell adhesion and proliferation. Physical and chemical changes, introduced by the used methods, were evaluated by complementary techniques for surface analysis such as sc...
متن کاملData-Based Modeling of Electroless Nickel Plating
This work connects the neocybernetic theory of elastic systems to modeling of a complex industrial process. It turns out that using simple mathematics combined with multilinear tools leads to linear models that can be used for monitoring and control. As an application example, electroless nickel plating is studied.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2023
ISSN: ['1884-3409', '0915-1869']
DOI: https://doi.org/10.4139/sfj.74.92