منابع مشابه
The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al
In this study, the effect of platinum-aluminide coating parameters on surface roughness of nickel-based superalloy Rene®80 was evaluated. For this purpose, different thicknesses of Pt-layer (2, 4, 6 and 8µm) were plated on the Samples. Then diffusion aluminide coating in two types, high tempeature-low activity and low temperature-high activity was performed. The results of structural investigat...
متن کاملCreep of Ni-Al and Ni-Cr-Al Superalloy Foams
The steady-state creep rate of Ni-base metallic foams, with superalloy composition (in wt. pct) Ni7.8∼9.1Al (relative density, ρ = 2.5-2.6) and Ni-13.5∼16.6Cr-5.1∼8.9Al (ρ = 2.8∼3.0), was measured under a range of temperatures (680∼825°C) and applied stresses (0.1∼0.3 MPa), and compared with that of NiAl intermetallic foams (ρ = 5.3). The stress exponent and activation energy are within the exp...
متن کاملControl of eta carbide formation in tungsten carbide powders sputter-coated with (Fe/Ni/Cr)
Composite powders of tungsten carbide with variable coating contents of Fe/Ni/Cr based alloys (1–15 wt.%) were prepared by sputtering. The coated powders have revealed a good performance to shape-forming and sintering. However, the presence of nanocrystalline coatings could enhance the formation of a brittle phase during sintering, named g-phase, (M,W)6C. To investigate this effect, the powders...
متن کاملOxidation – Nitridation of Ni-Cr-Al Alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...
متن کاملClathrin-coated vesicle formation: a paradigm for coated-vesicle formation.
Clathrin-coated pits are the major ports of entry into the cell and are responsible for the internalization of a variety of biologically important macromolecules. These transport intermediates form as a result of the co-ordinated assembly of a number of cytosolic proteins on to the membrane which results in specific cargo recruitment. We have used a variety of approaches including permeabilized...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1973
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.24.506