FORMATION OF ANODE ARSENATE FILM ON SILVER ELECTRODE

Antibacterial Activity of Silver Dot Array on Gold Thin Film by Utilizing the Sacrifical Anode Principle

Transparent Electrode Based on Silver Nanowires and Polyimide for Film Heater and Flexible Solar Cell

Transparent, conductive, and flexible Ag nanowire (NW)-polyimide (PI) composite films were fabricated by a facile solution method. Well-dispersed Ag NWs result in percolation networks on the PI supporting layer. A series of films with transmittance values of 53-80% and sheet resistances of 2.8-16.5 Ω/sq were investigated. To further verify the practicability of the Ag NWs-PI film in optoelectro...

A Solid-state Silver Ion Selective Electrode Based on Polyaniline/Eosin Y Nanocomposite Film

Potentiometric sensor based on commercial pencil graphite electrodes coated with polyaniline (PAni) composite with Eosin Y (EY) termed as PGE/PAni-EY have been developed for potentiometric determination of silver ion. The electrode exhibited linear response with Nernstian slope of 57.6±0.8 mV per decade within the range of 1.0×10 to 1.0×10 M with limit of detection 6.5×10 M silver ion. Fast and...

Voltammetric Determination of Acibenzolar-S-Methyl Using a Renewable Silver Amalgam Film Electrode

Acibenzolar-S-methyl (ASM) is a novel fungicide applied for crop protection. A renewable silver amalgam film electrode was used for the determination of ASM in pH 3.4 Britton Robinson buffer using square wave adsorptive stripping voltammetry (SWAdSV). The parameters of the method were optimized. The electroanalytical procedure made possible to determine ASM in the concentration range of 5 10 –3...

Thermal Analysis of Sintered Silver Nanoparticles Film

Thin bonded films have many applications in antireflection and reflection coating, insulating and conducting films and semiconductor industries. Thermal conductivity is one of the most important parameter for power packaging since the thermal resistance of the interconnections is directly related to the heat removal capability and thermal management of the power package. The defects in material...