Formation of Ag-Zn alloy layers by diffusion annealing.
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولFormation of Pt–Zn Alloy Nanoparticles by Electron-Beam Irradiation of Wurtzite ZnO in the TEM
As is well documented, platinum nanoparticles, promising for catalysts for fuel cells, exhibit better catalytic activities, when alloyed with Zn. Pre-existing syntheses of Pt-Zn alloy catalysts are composed of a number of complex steps. In this study, we have demonstrated that nanoparticles of Pt-Zn alloys are simply generated by electron-beam irradiation in a transmission electron microscope o...
متن کاملRapid solidification behavior of Zn-rich Zn–Ag peritectic alloys
Rapid solidification experiments, including laser remelting, melt-spinning and wedge casting, were carried out to investigate the rapid solidification behavior of Zn-rich Zn–Ag peritectic alloys containing up to 9.0 at% Ag. For comparison, Bridgman solidification experiments of the same alloys were also carried out for growth velocities ranging from 0.02 to 4.82 mm/s, which were lower than that...
متن کاملThin layers of plankton: Formation by shear and death by diffusion
We show that a steady vertically-sheared current can produce a thin layer of plankton by differentially advecting an initial patch whose vertical and horizontal dimensions are H0 and L0, respectively. Our model treats the plankton as an inert passive tracer with vertical diffusivity kv and subject to a vertically-sheared horizontal current with shear a. After a transient of duration L0=aH0 the ...
متن کاملHOT CRACK FORMATION IN PURE CU AND CU-30%ZN ALLOY DURING IN SITU SOLIDIFICATION
The hot cracking susceptibility can be determined by establishing the transition temperature between brittle and ductile fracture at high temperature tensile testing of in situ solidified samples. High temperature tensile properties were determined for commercial cathodic pure Cu and Cu- 30%Zn alloy. The transition temperatures for pure Cu and Cu-30%Zn were evaluated from ultimate tensile stres...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1986
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.37.713