Formation Kinetics of Iron Oxide in Mould Flux during Continuous Casting
نویسندگان
چکیده
منابع مشابه
Looking into continuous casting mould
When you look into the continuous casting mould you can see very little. Consequently, steelmakers have had to rely on plant trials, simulation experiments and physical property measurements on fluxes and steels to gain an understanding of the mechanisms responsible for process problems and product defects. However, in recent years, mathematical modelling has advanced to the stage where they ca...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Physical Modeling of Steel Delivery during Thin Slab Continuous Casting
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...
متن کاملCalculation of Physical Properties for Use in Models of Continuous Casting Process-Part 1: Mould Slags
* Corresponding author: E-mail: [email protected] DOI: http://dx.doi.org/10.2355/isijinternational.ISIJINT-2015-364
متن کاملAnalyzing the Failure of Master Mould in Casting of Copper Anode Moulds and Suggesting a more Suitable Metal Mould
Master moulds are used to cast copper anode moulds. These iron moulds are made of grey or nodular cast irons. According to desirable properties of ductile irons, it was expected that ductile cast iron ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2013
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.53.56