Formation and deposition of platinum nanoparticles under boiling water reactor conditions
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
INITIATION OF CaSO4 SCALE FORMATION ON HEAT TRANSFER SURFACES UNDER POOL BOILING CONDITIONS
The success of innovative fouling mitigation techniques such as ion implantation depends upon early stage of scale formation on heat transfer surface. This is because the first crystalline nuclei that appear on the surface during the initial period dictate how fouling would develop in latter stages. In this study, the initial period of deposition of calcium sulphate on heat transfer surfaces ha...
متن کاملPotential enhanced N-nitrosodimethylamine (NDMA) formation under water treatment conditions
This study investigates two aspects of NDMA formation reactions: (i) evaluation of the potential effect of formaldehyde on NDMA formation, particularly in reactions of dimethylamine (DMA) and nitrite, and (ii) assessment of potential NDMA formation from a range of polymeric coagulants and flocculants upon exposure to disinfection oxidants. The results show that the presence of formaldehyde can ...
متن کاملConvective Heat Transfer of Binary Mixtures under Flow Boiling Conditions
The present study represents part of an effort in considering the replacement of ethylene-glycol/water mixtures with propyleneglycol/water mixtures for engine cooling in automotive application. Experimental results are presented for the heat transfer coeffic ient under flow boiling conditions for water and mixtures of water with ethylene-glycol and propylene-glycol. The range covered includes t...
متن کاملEffects of Sputtering Conditions on Formation of Gold Nanoparticles in Sputter Deposition Technique
Sputter deposition of metals in a capture medium with extremely low vapor pressure is a simple and convenient method to generate the metal nanoparticles (NPs) without chemical reactions. By careful selection of the capture medium and/or temperature of the medium for the deposition, the size of the synthesized NPs can be controlled. Sputtering conditions also play an important role in determinin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Materials
سال: 2017
ISSN: 0022-3115
DOI: 10.1016/j.jnucmat.2017.07.018