Formability of Magnesium Alloys AZ80 and ZE10
نویسندگان
چکیده
منابع مشابه
Formability of Magnesium Alloys
The paper is focused on issues of processing of non-ferrous metals in practice, namely on Mg-Al-Zn based on magnesium alloys with graded Al contents. It is well known that forming of these alloys is difficult since this feature is caused by their crystallographic arrangement. Nevertheless, application of appropriate methods of forming, such as e.g. some of SPD processes, makes it possible to ac...
متن کاملCorrelation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys
* Corresponding author. Tel: 34 1 3944348; Fax: 34 1 3944357 E-mail: [email protected] ABSTRACT X-ray photoelectron spectroscopy (XPS) was used in order to investigate the correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys exposed to 98% relative humidity at 50oC. Commercially pure magnesium, used as the reference material, reveale...
متن کاملFatigue behaviour and fractography of extruded AZ80 magnesium alloys in very high cycle regime
In order to investigate the fatigue properties of extruded magnesium alloy in very high-cycle regime, rotary bending fatigue test was performed in ambient atmosphere at room temperature using the hourglass shaped specimens of AZ80 alloys extruded (Fspecimen) and treated by an artificial aging after extrusion (T5-specimen). From the experimental results, both specimens show a clear step-wise S-N...
متن کاملKinetics of SIMA AZ80 Magnesium Alloy
Semi-solid feedstock of AZ80 magnesium alloy modified by [trace] rare-earth Y element 10 (0, 0.2, 0.4, 0.8 wt.%) were fabricated by [strain-induced melting activation] (SIMA) in the form of 11 extrusion and partial remelting. The effect of Y addition on the microstructure evolution of [the] 12 extruded and [isothermally heat] treated alloy was observed by [using an] optical microscope (OM), 13 ...
متن کاملHot Formability of Particle reinforced Ti - Alloys
Titanium alloys exhibit mechanical and physical properties that fit structural applications demanding light-weight, corrosion resistance and biocompatibility. Ceramic reinforcements can further improve some of these mechanical properties, such as wear resistance, specific stiffness and specific strength. In comparison to continuous reinforced titanium alloys, the particle reinforced alloys (PRT...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2014
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.622-623.284