FORGING PROCESS IN THREE TOOL FOLDING DIE
نویسندگان
چکیده
منابع مشابه
Optimization of Flash, Billet Dimensions and Friction Factor in Closed Die Cold Forging Process
Three important parameters in designing a closed die for forging process are ratio of width to flash thickness, ratio of height to billet diameter and the friction factor. In this paper the influences of these parameters on the required force for the forging and percentage of die filling were investigated. It was found that by controlling the flash dimension, the material loss is reduced and t...
متن کاملClose-die Flashless Forging in Automotive Industry
This paper describes the possibilities and conditions of the closed-die flashless forging process using conventional mechanical presses and equipment. The technique of driven gear forging with an internal flash or with special die design has been developed. The quality of forgings is comparable to that achievable on Hatebur presses. Furthermore the problem of how to increase shift production un...
متن کاملEnhancement of hot forging die life using different methods
Forging dies at high temperatures are under contact pressure, variable mechanical loads and thermal shock, furthermore they should withstand wear and friction in a high level. So, in order to increase die life, the selection of die material, coating and hardness is essential. In this review, various methods used for die life enhancement such as carbide coating, using the super alloy stellite 6 ...
متن کاملdesign of the die profile for the incremental radial forging process
in this paper, based on the slab method of analysis, a novel and general approach isdeveloped for studying the radial forging process with curved profile dies. the presented approachis not only more general with respect to previous studies, but it is also easier to understand and useand can be efficiently used for optimization of the die profile depending on the forging geometryand conditions. ...
متن کاملEstimation of Spray Lubrication and Die Temperature for Die Wear Life Prediction in Hot Forging
We have been developing a process design CAE system to predict die wear life in the process design stage for the hot forging of steel. Our goal is to reduce production costs by shortening the development period, while maximizing the life of the die. In our system, we use an expression that defines the relationship between die wear, die strength, and friction factors, such as die pressure, slidi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgy and Foundry Engineering
سال: 2008
ISSN: 1230-2325
DOI: 10.7494/mafe.2008.34.1.105