Forced flow cooling of ISABELLE dipole magnets
نویسندگان
چکیده
منابع مشابه
The Lnls Booster Synchrotron Dipole Magnets
* [email protected] Abstract The Brazilian Synchrotron Light Laboratory (LNLS) has just constructed and commissioned a 500 MeV booster synchrotron to be used as injector for the 1.37 GeV electron storage ring. The booster has been constructed inside the storage ring, where the constraints in space are very tight. For this reason, the booster dipoles were made as small as possible, i.e., with small cu...
متن کاملAnalytical Field Calculation of Helical Dipole Magnets for Rhic
The analytical expression for the magnetic field of helical coils is presented. In particular, the multipole coefficients are introduced for helical dipole magnets, which are essential components of Siberian Snakes and spin rotators for polarized proton acceleration at RHIC. In addition, the comparison between analytical and numerical calculations is presented for simple helical dipole magnets.
متن کاملDIPOLE MAGNETS FOR THE SLAC 50 GeV A-LINE UPGRADE*
The SLAC A-Line is a transport system originally designed to deliver electron beams of up to 25 GeV to fixed target experiments in End Station A. To raise the beam energy capability of the A-Line to 52 GeV, the eight original bending magnets, plus four more of the same type, have been modified by reducing their gaps and adding trim windings to compensate for energy loss due to synchrotron radia...
متن کاملDynamically fluctuating electric dipole moments in fullerene-based magnets
We report here the direct evidence of the existence of a permanent electric dipole moment in both crystal phases of a fullerene-based magnet--the ferromagnetic α-phase and the antiferromagnetic α'-phase of tetra-kis-(dimethylamino)-ethylene-C60 (TDAE-C60)--as determined by dielectric measurements. We propose that the permanent electric dipole originates from the pairing of a TDAE molecule with ...
متن کاملNumerical Optimization of Pin-Fin Heat Sink with Forced Cooling
This study presents the numerical simulation of optimum pin-fin heat sink with air impinging cooling by using Taguchi method. 9 L ( 4 3 ) orthogonal array is selected as a plan for the four design-parameters with three levels. The governing equations are discretized by using the control-volume-based-finite-difference method with a power-law scheme on the non-uniform staggered grid. We solved th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Magnetics
سال: 1977
ISSN: 0018-9464
DOI: 10.1109/tmag.1977.1059318