Forced Convection Condensation on a Horizontal Tube : 2nd Report, Experiments for Horizontal Flow of Low Pressure Steam
نویسندگان
چکیده
منابع مشابه
Flow condensation in horizontal tubes
Article history: Received 30 April 2013 Received in revised form 20 June 2013 Accepted 20 June 2013 Available online 27 July 2013
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملFlow Pattern Identification and Pressure Drop Calculation for Gas-Liquid Flow in a Horizontal Pipeline
Two phase gas-liquid flow pattern in a horizontal pipeline is predicted very accurately using a newly-developed analytical relation. The pattern identification is based on one of the most widely used graphs, the Baker diagram, modified in a way that compensates for the unrealistic oversimplifications of recent works. The Kern's method of pressure drop calculation is used to obtain the frict...
متن کاملCombined Forced and Thermocreep Convection through a Long Horizontal Microchannel
This study examines how thermal creep affects the mixed convection in a long horizontal parallel-plate microchannel under a pressure drop and a temperature rise. The analytical solutions of the fully developed thermal-flow fields and the corresponding characteristics are derived based on the Maxwell boundary conditions with thermal creep and presented for the physical properties of air at the s...
متن کاملStabilities of Parallel Flow and Horizontal Convection
In the first part, the stability of two-dimensional parallel flow is discussed. A more restrictively general stability criterion for inviscid parallel flow is obtained analytically. First, a sufficient criterion for stability is found as either −μ1 < U ′′ U−Us < 0 or 0 < U ′′ U−Us in the flow, where Us is the velocity at the inflection point, and μ1 is the eigenvalue of Poincaré’s problem. Seco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1980
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.46.103