Force Transfer Mechanism of Headed Anchorage Bar in Exterior Beam Column Joint with Finite Element Method and Strut and Tie Model
نویسندگان
چکیده
منابع مشابه
Performance-based Optimization of Strut-and-tie Models in Reinforced Concrete Beam-column Connections
This paper presents the performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. The performance-based optimization (PBO) technique is employed to investigate optimal strut-and-tie models in reinforced concrete beam-column connections. Developing strut-and-tie models in reinforced concrete beam-column connections is treated as a topology optimizatio...
متن کاملINVESTIGATION OF THE ANCHORAGE BEHAVIOR OF HEADED REINFORCING BARS USING THE FINITE ELEMENT METHOD By
A headed reinforcing bar is a new type of reinforcement with a T-shaped anchor connected to the end of a reinforcing bar. Conceptually, the bar is usually a tension member or compression one depending on structural engineering applications. The T-shaped anchor, referred to as head in the rest of this report is a relatively stiff steel "plate" in terms of its structural behavior. When embedded i...
متن کاملFinite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملLoad Transfer Mechanism Based Unified Strut-and-Tie Modeling for Design of Concrete Beams
Strut-and-Tie Models (STM) for the design of concrete beams, comprising of struts, ties, nodes as the basic tools, is conceptually simple, but its realization for complex concrete structure is not straightforward and depends on flow of internal forces in the structure. STM technique has won wide acceptance for deep member and shear design. STM technique is a unified approach that considers all ...
متن کاملStrut-and-Tie Method for Prediction of Ultimate Shear Capacity of Shear-Strengthened RC deep beams with FRP
The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IPTEK Journal of Proceedings Series
سال: 2017
ISSN: 2354-6026
DOI: 10.12962/j23546026.y2017i6.3266