Force Measurements on a VAWT Blade in Parked Conditions
نویسندگان
چکیده
منابع مشابه
Force Measurements on a VAWT Blade in Parked Conditions
The forces on a turbine at extreme wind conditions when the turbine is parked is one of the most important design cases for the survivability of a turbine. In this work, the forces on a blade and its support arms have been measured on a 12 kW straight-bladed vertical axis wind turbine at an open site. Two cases are tested: one during electrical braking of the turbine, which allows it to rotate ...
متن کاملAnalysis of Different Blade Architectures on small VAWT Performance
The present paper aims at describing and comparing different small Vertical Axis Wind Turbine (VAWT) architectures, in terms of performance and loads. These characteristics can be highlighted by resorting to the Blade Element-Momentum (BE-M) model, commonly adopted for rotor pre-design and controller assessment. After validating the model with experimental data, the paper focuses on the analysi...
متن کاملTorsional Aeroelasticity of a Flexible VAWT Blade using a Combined Aerodynamic Method by Considering Post-stall and Local Reynolds Regime
The present research investigates the torsional aeroelasticity of the blade of an H-type vertical axis wind turbine subject to stall and post-stall conditions in various Reynolds regimes, which is experienced by the blade in a full revolution. In order to simulate the aerodynamics, a new model based on a combination of the Double Multi Streamtubes (DMST) model and the nonlinear multi-criteria C...
متن کاملExperimental Estimate of Helical Inducer Blade Force
An attachment of inducer is a powerful method to improve the cavitation performance of a turbo-pump. Cavitation surge phenomena, occurring under the severe suction pressure at a partial flow rate, is focused in the present paper. Flow measurements were carried out at the inlet and outlet sections of a flat-plate helical inducer with the solidity of 2.0 and tip blade angle of 11o by using a tota...
متن کاملBlade Tip Clearance and Blade Vibration Measurements Using a Magnetoresistive Sensor
A Blade Tip Timing (BTT) system enables the measurement of turbomachinery blade vibrations by means of contactless sensors mounted in the casing. In addition, the so-called Blade Tip Clearance (BTC) measurement system ensures the monitoring of the existing running gaps between the blade tip and the casing. This paper focuses on the results achieved so far using a novel magnetoresistive sensor f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2017
ISSN: 1996-1073
DOI: 10.3390/en10121954