Foil bearing lubrication theory including compressibility effects.
نویسندگان
چکیده
منابع مشابه
Study on of Foil Rolling With Lubrication Effects
In cold rolling of thin strips, i.e., foils (Thickness
متن کاملWhite Light Interferometry of Elastohydrodynamic Lubrication of Foil Bearings
This paper describes an experiment performed to verify the one-dimensional model of elastic foil behavior developed by Stahl, White, and Deckert [ 11. In the experiment, a loop of tape one-inch wide passes over a stationary recording head, and the air-film thickness between the head and the foil is determined using white light interferometry. Measured data for various experimental conditions ar...
متن کاملMixed Lubrication of Coupled Journal-Thrust-Bearing Systems Including Mass Conserving Cavitation
A mixed lubrication model is developed to investigate the lubrication of coupled journalthrust-bearing systems. The governing equations are mapped into a computational domain with a conformal mapping technique developed in a previous study by Wang et al. (2002). In order to study the influence of the boundary conditions on the performance of the bearing system, either the Reynolds boundary cond...
متن کاملFoil Bearing Stiffness Estimation with Pseudospectral Scheme
Compliant foil gas lubricated bearings are used for the support of light loads in the order of few kilograms at high speeds, in the order of 50,000 RPM. The stiffness of the foil bearings depends both on the stiffness of the compliant foil and on the lubricating gas film. The stiffness of the bearings plays a crucial role in the stable operation of the supported rotor over a range of speeds. Th...
متن کاملDetermination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects
In this paper, the equation of motion of an elastic 2 DoF wing model has been derived using Lagrange's method. The aerodynamic loads on the wing were calculated via the Strip-Theory and the effect of compressibility was included. Wing deflections due to bending and twist motions were determined using the Assume-Mode method. The aeroelastic equations were solved numerically using the V-g method....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
سال: 1989
ISSN: 0914-8825
DOI: 10.1299/jsmec1988.32.289