Foamed Cement Generation Methods: Insights from Macro-Porosity and Void Distribution
نویسندگان
چکیده
منابع مشابه
coordination of protective schemes in distribution and subtransmission systems including distributed generation
نصب منابع پراکنده در سیستم های توزیع و فوق توزیع علاوه بر مزیت های فراوان، مشکلاتی را هم به همراه دارد. یکی از این مشکلات تأثیر این منابع روی اندازه جریان های اتصال کوتاه است. به طور معمول از حفاظت های مبتنی بر اصل جریان زیاد در سیستم های توزیع و فوق توزیع استفاده می شود. از مهمترین طرح های حفاظتی استفاده شده در فیدرهای توزیع، حفاظت فیوز- ریکلوزر است. همچنین از طرح های حفاظتی جریان زیاد جهتی در...
Porosity reduction in bone cement at the cement-stem interface.
The fatigue failure of bone cement, leading to loosening of the stem, is likely to be one mode of failure of cemented total hip replacements. There is strong evidence that cracks in the cement are initiated at voids which act as stress risers, particularly at the cement-stem interface. The preferential formation of voids at this site results from shrinkage during polymerisation and the initiati...
متن کاملPorosity and Pore Size Distribution of Well Hydrated Cement-Fly Ash-Gypsum Pastes
This research is a part of a wide range investigation on the use of flue gas desulphurisation (FGD) in construction applications. It reports some results on the porosity and pore size distribution of cement paste containing varying amounts of fly ash-gypsum blends as partial replacement of cement. The cement was replaced with 25% of different blends of fly ash and gypsum. The gypsum content ran...
متن کاملPorosity and Pore Size Distribution
A soil’s porosity and pore size distribution characterize its pore space, that portion of the soil’s volume that is not occupied by or isolated by solid material. The basic character of the pore space affects and is affected by critical aspects of almost everything that occurs in the soil: the movement of water, air, and other fluids; the transport and the reaction of chemicals; and the residen...
متن کاملCellular Response to Doping of High Porosity Foamed Alumina with Ca, P, Mg, and Si
Foamed alumina was previously synthesised by direct foaming of sulphate salt blends varying ammonium mole fraction (AMF), foaming heating rate and sintering temperature. The optimal product was produced with 0.33AMF, foaming at 100 °C/h and sintering at 1600 °C. This product attained high porosity of 94.39%, large average pore size of 300 µm and the highest compressive strength of 384 kPa. To i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACI Materials Journal
سال: 2018
ISSN: 0889-325X
DOI: 10.14359/51701101