Fluoropolymer Film Formation by Electron Activated Vacuum Deposition
نویسندگان
چکیده
Polytetrafluoroethylene (PTFE), polyhexafluoropropylene (PHFP) and polychlorotrifluoroethylene (PCTFE) were heated to their decomposition temperature in a high vacuum. The emitted fragments passed an electron cloud, condensed on substrate formed fluoropolymer film. Growth rate of PTFE PHFP films increased up factor five the presence cloud. Mass spectrometry revealed changes mass spectra generated by thermal only under activation. observed different for each fluoropolymer. Infrared spectroscopy (IRS) showed that structure was close bulk polymers. Atomic force microscopy (AFM) has morphologies PTFE, PCTFE films, suggesting Volmer–Weber growth mechanism but Frank-van der Merwe one PCTFE. All smooth at nanoscale transparent from ultraviolet near-infrared region. Additional radio frequency (RF) plasma ignited low pressure mechanical characteristics without losing optical transparency smoothness.
منابع مشابه
Plasma-deposited fluoropolymer film mask for local porous silicon formation
The study of an innovative fluoropolymer masking layer for silicon anodization is proposed. Due to its high chemical resistance to hydrofluoric acid even under anodic bias, this thin film deposited by plasma has allowed the formation of deep porous silicon regions patterned on the silicon wafer. Unlike most of other masks, fluoropolymer removal after electrochemical etching is rapid and does no...
متن کاملHigh-vacuum versus ‘‘environmental’’ electron beam deposition
Electron beam deposition ~EBD! provides an inexpensive way to fabricate nanostructures of various materials in a scanning electron microscope ~SEM!. However, the purity of metals deposited from an organometallic precursor gas is impaired by simultaneously deposited carbon coming both from the organometallic molecule and the residual contamination gas in the SEM chamber. We discuss carbon-contam...
متن کاملEnergetic Deposition of Niobium Thin Film in Vacuum
(Abstract) Niobium thin films are expected to be free of solid inclusions commonly seen in solid niobium. For particle accelerators, niobium thin film has the potential to replace the solid niobium in the making of the accelerating structures. In order to understand and improve the superconducting performance of niobium thin films at cryogenic temperature, an energetic vacuum deposition system ...
متن کاملThick Film Deposition of Carbon Nanotubes by Alternating Electrophoresis
Electrophoretic deposition of carbon nanotubes (CNTs) using alternating current electric fields (0.01-1000 Hz) is reported. Pure acetone was used as suspending medium. Two parallel gold electrodes were used as depositing substrate. The effect of depositing parameters such as frequency and three waveforms (sinusoidal, rectangular and triangular) on deposit yield was investigated. According to ou...
متن کاملFormation and evolution of epitaxial Co5Ge7 on Ge„001... surface by reactive deposition inside an ultrahigh-vacuum transmission electron microscope
Cobalt was deposited on single-crystal Ges001d surface at ,350 °C by electron-beam evaporation in an ultrahigh-vacuum transmission electron microscope. The deposited Co reacts with Ge to form nanosized islands with the cobalt germanide Co5Ge7 phase. The Co5Ge7 islands show square and rectangular shapes. Two epitaxial orientation relationships between Co5Ge7 and Ge were observed: Co5Ge7 k110ls00...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surfaces
سال: 2021
ISSN: ['2571-9637']
DOI: https://doi.org/10.3390/surfaces4010009