Fluorine and sodium depletion followed by refractive index modification imprinted on fluorophosphate glass surface by thermal poling

نویسندگان

چکیده

Thermal poling using microstructured electrodes on oxyfluoride glasses have been investigated and the impact optical properties was evaluated. A micrometer refractive index modification based sodium fluorine migration has evidenced, through creation of a layer with different chemical composition as compared to original glass. Topological modifications after treatment are discussed. For first time, we described negative ion in direction cathode from glass network. Na F led richer oxides strong contrast + 0.06 imprinted structures.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermal poling of glass modified by femtosecond laser irradiation

Thermal poling of silica glass modified by femtosecond laser irradiation is demonstrated. Increase of second-harmonic generation in the irradiated regions is observed. This enhancement is interpreted in terms of structural modifications in silica glass that make the poling process more efficient. Evidence of a change in the distribution of the electrostatic field frozen in glass during poling i...

متن کامل

Surface Reactivity Control of a Borosilicate Glass Using Thermal Poling

The ability to control glass surface reactivity at different length enables key properties required for future “smart substrates”. Employing a thermal poling process on a specific borosilicate glass composition can yield a surface with tailored physical and chemical properties. This work shows that during poling, alkali contained in the glass matrix migrates from the anode to the cathode side o...

متن کامل

Experimental Study on the Surface Modification by Electrical Discharge Process

The creation of modified layer on metal surfaces using new methods is one of the procedures in surface engineering which can improve the surface mechanical properties. The electrical discharge process is a new method that can form a modified layer on the metal surfaces. This study aims to improve of pure aluminum surface properties through Electrical Discharge process with Monel 400 electrode. ...

متن کامل

Modification of Silica surface by Titanium sol synthesis and characterization

Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed T...

متن کامل

Modification of Silica surface by Titanium sol synthesis and characterization

Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed T...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Non-crystalline Solids

سال: 2023

ISSN: ['1873-4812', '0022-3093']

DOI: https://doi.org/10.1016/j.jnoncrysol.2022.122054