Fluid Flow Characteristic of EAF Molten Steel with Different Bottom-Blowing Gas Flow Rate Distributions
نویسندگان
چکیده
منابع مشابه
Research on the Molten Bath of EBT Area with Bottom-Blowing in EAF Steelmaking Process
Bottom-blowing, as widely adopted in electric arc furnace (EAF) steelmaking technology, stir the molten bath by blowing inert gas (Ar, N2) from the bottom of EAF to promote fluid flow and uneven metallurgical reaction in the molten bath. However, for eccentric structure design of electric arc furnace, the problem still exists in EBT(Eccentric Bottom Tapping)area. In this study, by the analysis ...
متن کاملFluid Flow Behaviour under Different Gases and Flow Rate during Gas Metal Arc Welding
Gas metal arc welding (GMAW) is a highly efficient and fast process for fabricating high quality weld. High quality welds are fabricated by proper selection of consumable includes gas and filler metals. The optimum flow rate of gas will ensure the proper quality of weld. In this project, a fluid flow behavior of different flow rate is modeled and the change quality will be studied. KeywordsHydr...
متن کاملTransient Mold Fluid Flow with Well- and Mountain-Bottom Nozzles in Continuous Casting of Steel
Nozzle shape plays a key role in determining the flow pattern in the mold of the continuouscasting process under both steady-state and transient conditions. This work applies computational models and experiments with a one-third scale water model to characterize flow in the nozzle and mold to evaluate well-bottom and mountain-bottom nozzle performance. Velocities predicted with the three-dimens...
متن کاملHypersonic Flow with Strong Blowing
A validation study is presented for a numerical code which calculates a two-dimensional steady-state solution for inviscid hypersonic flows in the presence of strong surface blowing. A higher-orde: Godunov-type finite-volume approach is used to discretize the inviscid Euler equations. Interface values of the state quantities are reconstructed nsing a monotone interpolation technique suggested b...
متن کاملFLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2020
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2019-794