Flow Visualization in The Fin-and-Tube Heat Exchanger

Fin-and-Tube Heat Exchanger Solid Core Advanced Simulation

This paper is devoted to the presentation of an advanced model for the heat conduction processes within a finned tube bundle, typically found in air-cooled evaporators and condensers. As a result of the computational effort needed to simulate the desired fin-and-tube local unsteadiness, some actions have been undertaken in order to obtain reasonable simulation time consumption. A specific cutti...

Enhancement of Round Tube and Flat Tube-Louver Fin Heat Exchanger Performance Using Deluge Water Cooling

An experimental study has been conducted to evaluate the performance of a compact round-tube louver-fin condenser, each with frontal areas of 0.25 m in both dry and wet conditions. Deluge water cooling is achieved by incorporating a perforated bottom plate-type water distributor on top of the round tube heat exchanger. Water is used as a refrigerant, and enters the heat exchanger tubes at 35°C ...

Principle of Designing Fin-and-Tube Heat Exchanger With Smaller Tube for Air Condition

Effective Heat Transfer Enhancement in Finned Tube Heat Exchanger with Different Fin Profiles

During cross flow in a heat exchanger, heat transfer in the front portion of the tube is more compared to back portion of the tube. This is due to less formation of vortices at the backside of the tube. For uniform heat transfer to take place throughout the tube, it is necessary to increase the vortex formation at the rear side of the tube. The aim of this study is to explore the possibilities ...

Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger

Heat and mass transfer, in this paper, is considered in one-row heat exchanger, that fins are hotter than air flow and water is added to fins. Related governing equations are derived by analyzing a two-dimension model in a unique cell of a heat exchange. These equations are numerically solved by finite difference method. Heat transfer and efficiency under partially wet surface are calculated by...