Flow Velocimeter with Wide-Stripe Semiconductor Laser.
نویسندگان
چکیده
منابع مشابه
Laser Doppler flow measurements with a semiconductor laser.
In their report on laser Doppler flow measurements (J. Biomed. Eng. 1985, 7, 225) Boggett et al. compared, among other things, three different light sources for use in a laser Doppler device. The aim of that study was to distinguish between Doppler shifted and non-shifted backscattered light to obtain a flow dependent signal, which is not caused by intensity fluctuations due to number fluctuati...
متن کاملA Sub-Miniature Laser-Doppler Velocimeter for High Speed Flow Measurements
A new laser-Doppler velocimeter (LDV) for high speed flow measurements (three-dimensional flows with speeds greater than 610 m/s) is being developed based in-part upon an existing low speed instrument capable of high resolution, near surface velocity vector measurements. The key technology for the instrument is a sub-miniature laser-Doppler velocimeter (SMLDV); a similar low-speed version of wh...
متن کاملGaN laser self-mixing velocimeter for measuring slow flows.
The self-mixing (SM) laser sensing technique allows for a simple, self-aligned, and robust system for measuring velocity. Low-cost blue emitting GaN laser diodes have recently become available owing to the high volume requirements for Blu-ray Disc devices such as high-definition video players and gaming consoles. These GaN lasers have a significantly shorter wavelength (around 405 nm) compared ...
متن کاملDirectional spatial-resolved laser Doppler velocimeter using a two-colour fibre laser
A concept for the realisation of directional laser Doppler velocimeters (LDV), without having to use opto-electronic modulators like Bragg cells is presented. The concept is based on the use of a diode-pumped fibre laser, emitting at two different wavelengths. The two laser colours are used to generate two interference fringe systems in the measuring volume of the LDV system. The fringe systems...
متن کاملLaser Stripe Profiler Calibration Using Nonlinear Models
The calibration of a laser stripe profiler consisting of a laser stripe projector, camera, and linear motion table is considered. A nonlinear system model is used which accommodates radial distortion in the camera lens. The way in which stripe data is extracted from the camera images leads to a natural formulation of the calibration problem as a nonlinear least squares problem. This can then be...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1992
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.58.3685