Flow Strength of 6061-T6 Aluminum in the Solid, Mixed Phase, Liquid Regions
نویسندگان
چکیده
منابع مشابه
Two-dimensional Mapping of Residual Strains in 6061-t6 Aluminum Alloy Friction Stir Welds
The residual strain profiles were measured through the thickness of friction-stir welded (FSW) plates using neutron diffraction to study the relationship between the angular distortion and the residual strain distribution. Three different weld specimens were prepared from a 6061-T6 aluminum alloy with the purpose of separating the effects of the frictional heat and plastic deformation on the re...
متن کاملAn alternative to increase the mechanical strength of 6061-T6 GMA weldments
Fusion welding of heat treatable aluminum alloys leads to a significant loss of strength in the heat affected zone (HAZ) due to overaging. This work was aimed to improve the mechanical properties of Al-6061 welds. Plates of 6 mm in thickness were solutionised at 530◦C for 1 h followed by water quenching and aging at 160◦C for times between 13 to 19 hours. Welding was performed with the gas meta...
متن کاملthe effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)
cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...
the effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Dynamic Behavior of Materials
سال: 2015
ISSN: 2199-7446,2199-7454
DOI: 10.1007/s40870-015-0030-6