Flow property measurements for nanoimprint simulation
نویسندگان
چکیده
منابع مشابه
Limitations of simple flow models for the simulation of nanoimprint
A quick evaluation of the forces involved in nanoimprint would be very helpful in the prevention of mold deflection. Unfortunately, it is shown here that assuming simplified flows may lead to quite incorrect evaluations of these forces, even for simple periodic patterns and a Newtonian behavior. The mere use of the classical result of the lubrication theory does not account for the range of thi...
متن کاملNumerical simulation of in-cylinder tumble flow field measurements and comparison to experimental results
This paper presents a comparison between measured and predicted results of the in-cylinder tumble flow and the flow coefficient generated by a port-valve-liner assembly on a steady-flow test bench. In this study, computational fluid dynamics (CFD) methods were employed to gain further insight into characteristics of an engine. The purpose was to advance understanding of the stationary turbulenc...
متن کاملMeasurements and Simulation of Ori ce Flow for Micropropulsion Testing
Numerical and experimental results for a rare ed gas expansion through a thin circular ori ce are presented. The ori ce owwas used as a calibrationtest for a torsional thrust standdesigned tomeasure force levels from10¡6 to 10¡3 N. Molecular nitrogen, argon, and helium at room temperature are used as test gases. The mass ux and thrust measurements are compared with the direct simulationM...
متن کاملSpherical Indentation and Flow Property Measurement-Finite Element Simulation
Previous work by Au, Lucas, Sheckerd & Odette [1] and Haggag and Lucas [2] and others showed that ball indentation testing techniques can be used to evaluate flow properties. More recently Haggag et al [3] have extended and refined the general approach. This work is aimed at assessing the accuracy and reliability of this method based on finite element analysis (FEA) simulations of the ball inde...
متن کاملConceptual Design and Simulation of Alpha-Beta Detector for Surface Contamination Measurements
The radioactive contamination measurement is essential in nuclear facilities. Monitoring of low level alpha and beta contamination is possible using light detectors high efficiency. Due to the fact that many detectors canchr('39')t simultaneously discriminate alpha, beta and gamma rays; among existing methods, phoswich detectors would be appropriate option to measure different radioactive conta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microelectronic Engineering
سال: 2007
ISSN: 0167-9317
DOI: 10.1016/j.mee.2007.01.065