Flow Oscillation in Dual-Bell Nozzle at Low-Altitude Operation
نویسندگان
چکیده
منابع مشابه
Control of Nozzle Flow Using Microjets at Supersonic Mach Regime
This article reports the active control of base flows using the experimental procedure. Active control of base pressure helps in reducing the base drag in aerodynamic devices having suddenly expanded flows. Active control in the form of microjets having 0.5 mm radius placed at forty-five degrees apart is employed to control the base pressure. The Mach numbers of the present analysis are 1.7, 2....
متن کاملPeak expiratory flow at altitude.
The mini Wright peak flow meter is a useful, portable instrument for field studies but being sensitive to air density will under-read at altitude. True peak expiratory flow will increase at altitude, however, because of the decreased air density, given that dynamic resistance is unchanged. The effect of simulated altitude on peak expiratory flow (PEF) was determined in six subjects with both th...
متن کاملReacting Nozzle Flow
The two limits, “frozen” and “equilibrium” flow share an important property: both are isentropic flows (if we ignore friction or heat losses). This is because, in the frozen case no chemical change during expansion), there are no rate processes at all occurring, the molecules preserving their identity all the way, while in the equilibrium case, in which reactions do occur, their rate is so high...
متن کاملOscillation of High-Altitude Balloons
ENGINEERING NOTES are short manuscripts describing new developments or important results of a preliminary nature. These Notes cannot exceed 6 manuscript pages and 3 figures; a page of text may be substituted for a figure and vice versa. After informal review by the editors, they may be published within a few months of the date of receipt. Style requirements are the same as for regular contribut...
متن کاملSpace Advantage Provided by De - Laval Nozzle and Bell Nozzle over Venturi
Abstract:-The FSAE guidelines state that it is mandatory for each and every car participating in the said event to have a single circular 20mm restrictor in the intake system. All the air flowing to the engine must pass through this restrictor. Conventionally, a Venturi Nozzle is used as a restrictor. In our research, we have proposed two Nozzles: De-Laval Nozzle and Bell Nozzle as an alternati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
سال: 2012
ISSN: 1344-6460
DOI: 10.2322/jjsass.60.24